Are bicycle chains interchangeable?

Bicycle chains are made of multiple pairs of steel outer plates and inner plates held together by rivets. … However, this does not mean all makes and models of chains are interchangeable. There are two basic types of bicycle chains: “one-speed” chains, and derailleur chains.

How do I know what chain I need for my bike?

The method of chain sizing depends upon the range of gearing in the system. For bikes with rear sprockets 36 teeth and smaller, the common system is to measure using the largest rear sprocket and largest front ring as a reference. Two rivets are added to this (one-inch) for the place to cut the chain.

Are 6 7 8 speed chains the same?

Chains for 6-, 7-, or 8-speed cassettes are generally universally compatible across brands and speeds. That means if a chain says “8-speed Shimano” you can use it in your old 6-speed, too. All you have to do is line up the new chain with the old one and cut it to size.

IT IS IMPORTANT:  Do BMX bikes have breaks?

Are bike chains different sizes?

Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.

How do I know my chain size?

To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

How do you replace a bike chain?

How to replace a bike chain in eight steps

  1. Remove the old chain. First, jettison the old chain. …
  2. Clean the cassette. Now is a good time to clean and inspect your chainrings and cassette. …
  3. Thread the new chain. …
  4. Work out the correct length. …
  5. Cut to size. …
  6. Insert the pin. …
  7. Push the pin home. …
  8. All done.

Do all bike chains have a master link?

Not all bikes have these links. They are most likely to be found on BMX bikes, single speed bikes or three-speed town bikes with internal gears. The more sprockets a bicycle has on its rear cassette, the narrower the chain must be and therefore the less room there is for this extra-wide master link.

How much does it cost to replace a bike chain?

How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.

IT IS IMPORTANT:  Do mountain bikes have speeds?

Are 7 and 8 speed chains the same width?

5, 6, 7 and 8 speed chains

Shimano, SRAM and Campagnolo all use the same chain with 8 speeds. Chain for 7 speeds is a bit wider – 7.3 mm, while a 6 speed one is substantially wider – 7.8 mm.

Are 11 and 12 speed chains the same?

This is accomplished by making the outer links of the chain thinner. … Ultimately, single-speed chains are the strongest because they can be very thick since there’s only one cog at the back. The width of a 12-speed chain is roughly 5.25mm whereas that of an 11-speed chain is 5.62mm. That’s a 0.37mm difference.

Are SRAM and Shimano 8 speed chains interchangeable?

CHAINS AND CASSETTES

Buyers are free to use a SRAM chain and cassette with their Shimano groupset, and vice versa, just as a SRAM chain can be paired with a Shimano cassette, and vice versa. SRAM’s cassettes and chains are compatible with all of Shimano’s groupsets, and vice versa.

What is the difference between 1 8 and 3/32 chain?

A 1/8″ chain is 3.18 mm, and a 3/32″ chain is 2.30 mm. … The 3/32″ chain will be slightly more flexible than a 1/8″ chain, which means it will be a bit happier if your chainline is not very straight. Using a track frame and track style crankset you should not have this problem.

Are 10 and 11 speed chains the same?

The spacing between 11-speed chainring teeth centers is not narrower than on 10-speed chainrings. In some cases, it is even a bit wider on 11-speed. So your system will perform pretty much the same as it does now if you were to replace your 10-speed chainrings with 11-speed ones.

IT IS IMPORTANT:  What shoes are good for cycling?

Are SRAM and Shimano cassettes interchangeable?

SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets. However, Campagnolo road cassettes will only work with Campagnolo drivetrains.