Mountain bikes have between 1-40 gears, with most mountain bikes having between 7 and 28 gears and some custom mountain bikes have over 40. Adult mountain bikes have on average more gears than kid’s mountain bikes do.
What is a good gear ratio for mountain bike?
Mostly, for a mountain biker with average physical abilities the best and most recommended gear ratio combination is 32T on the front with 34T on the back.
How many speeds are good for a mountain bike?
7 Speed vs 21 Speed Bikes
In terms of how the number of gears affects the overall ride of the bike, a 21-speed is generally faster with smoother transitions and pedaling. The 7-speed is adequate for most riders, which is why many people choose the slower option.
Are more gears better on a mountain bike?
Having more gears, generally means you can reach a higher speed, of which mountain bikes just don’t need. … Some mountain bikers enjoy the feeling of going faster on their bike, but if you’re more into having a wide range available for different situations it is possible with less gears!
Is a 9 speed mountain bike good?
Yes, 9-speed bikes are pretty much just as good as 11-speed bikes. A 9-speed gearset will have the same range as an 11-speed set, IE 11–27 teeth. What an 11-speed gearset gets you is tighter gearing, because you have more gears within that range.
What gear should I use on a flat road?
For riding on flat roads, it is recommended to use the middle gear. It is a common choice among bikers as it helps you reduce pressure from your feet onto the pedals.
Is 1X better than 3X MTB?
For a beginner, there is no doubt that a 1X drivetrain is the easiest to use. If you want to go faster, you go up a gear, if you need to go slower, you go down. In comparison, using a 2X or 3X drivetrain takes a little more practice.
What does 12 speed bike mean?
On the back, the 12-speed cassette starts at a 10-tooth cog, and increases by 1-tooth per cog. The overall result is that you can reach a higher resistance at the top-end, and your smallest gear is even easier to push.
What is the difference between 7 speed and 21 speed?
In a 7 speed set up you have a single front sprocket and 7 at the rear (of different ratios, or number of teeth) with a single gear shift lever. In the 21 speed you have 3 sprockets with different gear ratios in front and 7 at the rear wheel, therefore 7X3=21.
Which gear is best for cycle?
What are the best gears to cycle in? Shift to easier gears when climbing uphill or when you’re riding in the direction of the wind. Use a harder gear for flat terrains, or if the wind is blowing from behind – a tailwind situation. If you’re in doubt, it is advisable to shift before a terrain change.
What does an 8 speed bike mean?
The 8-speeds use what most folks would probably refer to as the “standard” gearing set-up on a bike – different-sized external cogs are shifted through by moving the chain with a derailleur (that thingy that hangs down with the “little pulley” on it that adjusts the chain’s tension and slides it left and right to …
Is 12 speed enough for mountain bike?
Not much in between. 9 or 10 speed with a big spread would be lighter than 11 or 12 cassette, or could be as heavy as 11/12 but more robust and not as finicky. niche requirements for more gears though – like adventure racers/tourers (but even then the MTB setup is likely enough) and also tandems/recumbents.
Is 8 gears enough on a bike?
Means no I don’t believe 8 gears is enough once he gets up to speed and fitness. 50-11 at a top gear is plenty for 95% of riders. For high speeds the number of gears is irrelevant.
What is faster 9 speed or 11-speed?
11-speed cassettes are absolutely not faster than 9-speed cassettes. The factor that determines the speed of your bike is you; the rider. Putting an 11-speed cassette on your bike will not magically produce more speed. It will, however, allow you to find the correct gear more easily.
Do I need a 10 speed bike?
Yes, 10-speed bikes are good simply because they have a lot of range. If you’re climbing a mountain, they’re not the best. However, if you’re just climbing a hill, then you’ll be all set with a 10-speed bicycle.
Is 9 gears enough on a bike?
If you’re more concerned with enjoying the view from the saddle than the view from the podium, opt for a triple gear up front and nine gears on the back wheel. It’s a more comfortable ride, but be prepared to spend more time covered in grease carefully cleaning your drive chain.