# What does an 11 32 cassette mean on a bike?

Contents

The rear cassette is 11 speed 11-32. This means there are 11 cogs ranging from 11 teeth up to 32 teeth (the exact cogs are 11/12/13/14/16/18/20/22/25/28/32).

## What is the difference between 11-28 and 11-32 cassette?

In the event you find yourself grinding up a hill at 7 mph, the 11-32 cassette allows you to ride at 81 rpm, while with the 11-28, you’ll be riding at 71 rpm. When you really need it – steep, long hills, at the end of a long ride – this 10 rpm difference is quite noticeable!

## Is an 11 34 cassette good for climbing?

All other things being equal, the 34T sprocket on the 11-34T cassette is going to give you the easiest gear. If your bike is currently fitted with an 11-28T cassette, switching to an 11-34T cassette will make climbing less of a struggle.

## What does 11 42t cassette mean?

Sprockets vary in size according to the number of teeth they have. A cassette may therefore be sized as 11-32t. The first number refers to the number of teeth on the smallest sprocket (the highest gear, for fast pedalling at speed) and the second number to the biggest sprocket (the lowest gear, for climbing hills).

## What is the difference between 11-28 and 11 34 cassette?

As shown, the maximum speed is the same with the 11 tooth cog and the 11-28 and 11-30 cassettes share the same gearing combinations until the largest three cogs. However, the 11-34 cassette has easier gearing in every combination except while in the 11 tooth cog.

## Is an 11-32 cassette good for climbing?

They use mountain bike shifters and derailers, a mountain bike cassette (usually 11-32 or 11-34 range), and a touring (28-28-48) crankset. So, if you’ve got an 11-32 cassette on your hybrid bike, and you want to swap it to an 11-34 to get you little bit of extra “oomph” for climbing, it’s an easy cassette upgrade.

## Is 11/32 cassette Good for hills?

Most riders can get away with a compact chainset 50 / 34 and an 11 – 32 cassette for their steepest hills. Many touring bikes and tandems still use triple chainsets, but they often have heavier loads to haul.

## Which cassette ratio is best for climbing?

For hill climbing and mountainous terrain, we recommend a road cassette such as the 11-32T SRAM Red 22 XG1190 11 Speed Cassette (A2), or the 11-34T Shimano Ultegra R8000 11 Speed Cassette.

## How do I know what size cassette to get?

The rule of thumb for choosing the right bike cassette is that the closer the number of “teeth” from the largest and the smallest cogs, the smaller the variation between gears, which ensures a smooth gear change.

## What gear should I bike in on flat road?

For riding on flat roads, it is recommended to use the middle gear. It is a common choice among bikers as it helps you reduce pressure from your feet onto the pedals.

IT IS IMPORTANT:  Can I drive my bike with TC number?

## Why are cassette teeth different?

Each sprocket has a different amount of teeth. A higher amount of teeth makes it easier to pedal than a low number and vice versa. Most road bikes come supplied with a 12–25T cassette, where the smallest sprocket has 12 teeth and the largest sprocked has 25 teeth.

## Can I put a bigger cassette on my bike?

Yes, almost any bike is compatible with bigger cassettes, bike drivetrain is groupset of components that works in perfect harmony, any miss reconfiguring can break the perfect functionality of the system, parts that need to be changed and reconfigured when putting bigger cassette which is long-chain, wide cage …

## What gears do pro cyclists use for climbing?

“Most of our men will use a 36×29 and some, the climbers with stronger legs, will have a 39 and a 32 in the back. Hofland, our remaining sprinter, uses a 36 by 29. “On the normal stages or the other mountain stages, they use a 39 in the front and a 29 on the back. And that’s more than fine for the normal stages.”